Orange Pi Plus - 1.6 GHZ quad-core Allwinner H3 SoC 40-pin Pi-compatible GPIO, WiFi, and SATA.-

+ CLICK IMAGES TO ZOOM

Orange Pi Plus - 1.6 GHZ quad-core Allwinner H3 SoC 40-pin Pi-compatible GPIO, WiFi, and SATA.- Orange Pi Plus - 1.6 GHZ quad-core Allwinner H3 SoC 40-pin Pi-compatible GPIO, WiFi, and SATA.- Orange Pi Plus - 1.6 GHZ quad-core Allwinner H3 SoC 40-pin Pi-compatible GPIO, WiFi, and SATA.- Orange Pi Plus - 1.6 GHZ quad-core Allwinner H3 SoC 40-pin Pi-compatible GPIO, WiFi, and SATA.- Orange Pi Plus - 1.6 GHZ quad-core Allwinner H3 SoC 40-pin Pi-compatible GPIO, WiFi, and SATA.- Orange Pi Plus - 1.6 GHZ quad-core Allwinner H3 SoC 40-pin Pi-compatible GPIO, WiFi, and SATA.- Orange Pi Plus - 1.6 GHZ quad-core Allwinner H3 SoC 40-pin Pi-compatible GPIO, WiFi, and SATA.-

Orange Pi Plus - 1.6 GHZ quad-core Allwinner H3 SoC 40-pin Pi-compatible GPIO, WiFi, and SATA.-

Shenzhen Xunlong

$ 66.00 

Sorry, this item is temporarily out of stock.

DESCRIPTION  

( Ships pre-loaded with Android 4.4.2 )
Orange Pi Plus is a new contender in the open source single board computer world  with a 1.6GHz quad-core Allwinner H3 SoC, 40-pin Pi-compatible expansion, WiFi, and SATA.
The Orange Pi Plus ships with 1GB RAM and a microSD slot, as well as WiFi and gigabit Ethernet networking. You get four USB 2.0 host ports plus a micro-USB OTG port that can be used to power the 5V SBC. Other features include HDMI, CVBS, audio, and CSI camera connections.
The Orange Pi Plus is open source, with a variety of Linux and Android builds available.
The Orange Pi Plus offer extras not found on the RPi 2, including SATA, gigabit Ethernet, WiFi, and with the Plus, a generous 8GB of eMMC flash, The H3 has a faster 1.6GHz clock rate than the 1GHz A31, The H3 supports H.265/H.264 4K hardware acceleration at up to 30fps, as well as 4K video point-to-point HDMI output.
Specifications listed for the Orange Pi Plus include:
  • Processor — AllWinner H3 (4x Cortex-A7 @ 1.6GHz); ARM Mali-400 MP2 GPU @600MHz; 256KB L1, 1MB L2 cache
  • RAM — 1GB DDR3
  • Storage:
    • microSD slot for up to 64GB:
      • SATA 2.0 port for up to 2TB on a 2.5-inch drive
      • 8GB eMMC flash
  • Wireless — WiFi
  • Networking — gigabit Ethernet port
  • Multimedia I/O:
    • HDMI with audio
    • CVBS
    • Camera interface — CSI
    • 3.5mm audio jack with mic, line-in, FM-in
  • USB — 4x USB 2.0 host; micro-USB 2.0 OTG
  • Expansion — 40-pin header with 28x GPIO for UART, I2C, SPI, PWM, CAN, I2S, SPDIF, LRADC, ADC, line-in, FM-in, HP-in
  • Other features – Debug TTL and ground UARTs; IR input; power, reset, and UBoot buttons; LEDs; “upgrade key”
  • Power – 5V/2A DC input or micro-USB OTG; 3W dissipation
  • Operating temperature — -10 to 65℃
  • Weight — 60 g (2.1oz)
  • Dimensions — 112 x 60mm
  • Operating system — Linux (Debian, Lubuntu, Raspbian); Android 4.4 and older; Scratch support
Power Adapter for Orange Pi 
    Orange Pi Resource Page 
    Orange Pi Downloads 

    We accept these payment methods:

    Amex Discover Google Mastercard Paypal Visa